ATV,
AV,
Component
(480i,
480p)
16:9, Zoom1,
Zoom2, 4:3
DTV
(1
080i, 1 080p), Component
(1
080i,
1 080p),
HOM
I
(720p,
1 080i, 1 080p)
16:9, Wide Fit,
4:3, Screen Fit
• Digital Noise Filter (Off
I Low I Medium I High I Auto) :
If
the
broadcast signal received by your TV
is
weak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
~
When the signal
is
weak, try
all
the Digital Noise Filter
options until the TV displays the best picture.
• HDMI Black Level (Normal
I Low): For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
darker.
~
Available only
in
HDMI
mode
(RGB signals).
• Film
Mode
(Off I Auto) : Sets the TV to automatically sense and
process film signals from
all
sources and adjusts the picture for
optimum quality.
~
Available
in
ATV,
DTV (interlace),
AV,
COMPONENT (480i I
1 080i) and HDMI (480i I 1 080i).
• LED Motion Plus (Off
I
On):
Removes drag from fast scenes
with a lot of movement to provide a clear picture.
Picture Reset
• Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
Sound
Menu
II
Mode
ll•1•1'fil
• Standard: Selects the normal sound mode.
• Music: Emphasizes music over voices.
• Movie: Provides the best sound for movies.
• Clear Voice: Emphasizes voices over other sounds.
• Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available
in
Standard sound mode
only.
• Balance
UR:
Adjusts the balance between the right and left
speaker.
•
1OOHz
I 300Hz I 1 KHz I 3KHz I 1OKHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
• Reset: Resets the equalizer to its default settings.
SRS TruSurround HD (On/Off)
Available
in
Standard sound mode
only.
SRS TruSurround
HD
is
a patented SRS technology that solves
the problem of playing
5.1
multichannel content through
two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers.
It
is
fully compatible with
all
multichannel formats.
Preferred Language
Digital channels
only.
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations
of
a program
into foreign languages).
~
You can only select a language from
among
the ones being
broadcast.
Multi-Track Sound (MTS)
Analog channels
only.
• Mono: Select for channels that are broadcasting
in
mono or if
you are having difficulty receiving a stereo signal.
• Stereo: Select for channels that are broadcasting
in
stereo.
• SAP: Select to listen to the Separate Audio Program, which
is
usually a foreign-language translation.
~
Depending on the program being broadcast, you can listen to
Mono, Stereo
or
SAP.
Auto Volume
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
feature automatically adjusts the volume
of
a channel by lowering
the sound output when the modulation signal
is
high or by raising
the sound output when the modulation signal
is
low.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs
an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio
in
jack on a
receiver or home theater.
• Audio Format (PCM/Dolby Digital):
You
can select the Digital
Audio output
(SPDIF)
format. The available Digital Audio output
format may differ depending on the input source.
~
By connecting the TV to a receiver
or
home
theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
experience.
• Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital
audio output from the TV through
an
external
device such as an
AV
receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER
G when done
(Oms
- 250ms).
Speaker Settings
• Speaker Select (External Speaker I TV Speaker)
If
you are listening to the sound track of a broadcast or movie
through
an
external receiver, you may hear a sound echo caused
by the difference
in
decoding speed between the TV's speakers
and the speakers attached to your audio receiver.
If
this occurs,
set the TV to External Speaker.
~
When you set
Speaker
Select
to
External Speaker, the
TV's speakers are turned off. You will hear sound through
the external speakers only. When you set
Speaker
Select
to
TV
Speaker
both the TV's speakers and the external
speakers are on. You will hear sound through both.
~
When
Speaker
Select
is
set to External Speaker, the
VOLUME
and
MUTE
buttons
will not operate and the
sound settings will be limited.
~
If there
is
no
video signal, both the TV's speakers
and
the
external speakers will be mute.
Sound Reset
• Reset
All:
Resets
all
sound settings to the factory defaults.
-
3-
To Next Page
Loading...
