Samsung UN32F50**AF - Entering Factory Mode; Initial SERVICE MODE DISPLAY State

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF MENU 1 8 2 Power On
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus•
Initial SERVICE MODE DISPLAY State ¢
Option
Control
Debug
SVC
ADC/WB
Advanced
T-MX13AUSC-0224.0
DTP-LP3-0278
DTP-LP3-App-0278
HDCP : SUCCESS
CALIB:HDMI/COMP/PC/AV/
OPTION:32A6AHOS,US,4000,NONE
USB Serial:OFF
Picture Data:**.**.**
BuildDate : **-**-****
Date Of Purchase : **/**/**
4-10
4. Troubleshooting