Turns the TV on and off.
Displays and selects the available video
sources.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to On will reduce the battery usage
time.)
Returns to the previous channel.
MUTE: Cuts off the sound temporarily.
CH LIST: Displays channel lists on the
screen.
Changes channels.
Support to recommendation search
word and search function.
Displays information on the TV screen.
Exits the menu.
Gives direct access to channels.
Press to select additional digital channels
being broadcast by the same station. For
example, to select channel ‘54-3’, press
‘54’, then press ‘-’ and ‘3’.
Adjusts the volume.
Opens the OSD.
Quickly select frequently used functions.
Link to various application services.
Returns to the previous menu.
Selects the on-screen menu items and
changes the values seen on the menu.
Buttons used in the Channel and
SMART HUB menu, etc.
Use these buttons in SMART HUB and
Anynet+ (HDMI-CEC) modes.
SOCIAL TV: Connect to Social TV
application.
HOTAPPS: Runs BBY.
X
: Turns the 3D image on or off.
E-MANUAL: Displays the e-Manual.
P.SIZE: Lets you select the Picture Size.
CC: Displays digital subtitles.
[UD6900-NA]BN68-03488A-02L03.indb 8 2011-02-16 오전 9:53:08
English - 9
✎
NOTE
y The remote side doesn’t work when the QWERTY side is up, and vice versa.
Inserting Batteries
1 2
y Slide out the battery cover. y Push the button right.
3 4
y Pull the battery tray out. y Insert 4 AAA batteries in the tray, insert the battery tray
into the QWERTY Remote and put the cover back on.
Initial Pairing
1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB” will be displayed on the
screen.
2. Press SYM and TAB buttons at the same time more than 2 seconds.
✎
A TV can be paired with only one QWERTY Remote.
When turn on the TV, start the pairing process about 30 seconds later.
To perform the pairing process again
1. If the QWERTY Remote have been paired before, press @ and ← on the QWERTY side more than 3 seconds.
"RESET OK" will be displayed on the LCD of QWERTY remote.
2. Press MUTE, 0, MUTE and 0 on the remote side of new QWERTY Remote facing the TV.
Press the buttons in 4 seconds, without waiting any OSD displayed on the TV.
3. Follow the initial pairing process in 3 minutes.
✎
If the initial pairing process doesn't finish in 3 minutes, perform the whole process again.
SMART
HUB
SEARCH
BA C
ESC
CAPS SHIFT SHIFTSYM SYM.COM
@
21 3
54 6
8
0
7 9
#!
$
@
^%
& (*
)
-
_
+
~`
<
[
=
]
;
/
/
>
,
}{ |
‘: “
?
.
WQ E
SA D
Z
TAP ENTER
X
TR Y
GF H
VC B
IU O
KJ L
P
MN
D
MENU
m
E
Convenient QWERTY keyboard to type characters in SMART HUB and
SOCIAL TV menu, etc.
SYM: Enables the symbol printed on the lower right side of each button.
OFN(Optical Finger
Navigation) Sensor
In full browser function,
it can be used as the
pointer. If the user
doesn’t press any button
during 30 seconds,
the sensor will be off
automatically.
To wake up the sensor,
press any button on the
QWERTY side.
Displays the characters the user typed in.
When the user presses ENTER
E
, all characters
on the screen are removed.
[UD6900-NA]BN68-03488A-02L03.indb 9 2011-02-16 오전 9:53:09
To Next Page
Loading...
