◀ ◀▶
English
●
Lock
The Lock function lets you lock some application in My Applications so they
cannot be opened without entering the password.
To use the Lock function, follow these steps:
1. Press the
{
button on your remote.
2. Press the
u
/
d
/
l
/
r
to select an application, and then press the
ENTER
E
button.
3. Press the
u
/
d
/
l
/
r
to select Lock, and then press the ENTER
E
button. The Lock Service screen appears.
4. Enter your password. If you do not changed a password, enter “0-0-0-0”.
5. Press the ENTER
E
button. A confirming message screen appears. A lock
symbol appears next to the application.
To Next Page
Loading...
