◀ ◀▶
English
●
If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●
The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
●
If a USB extension cable is used, the USB device may not be recognized or the
files on the device may not be read.
●
If a USB device connected to the TV is not recognized, the list of files on the
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●
If a file deleted from the PC is still found when Smart Hub is run, use the “Empty
the Recycle Bin” function on the PC to permanently delete the file.
To Next Page
Loading...
