◀ ▶
English
Issues Solutions and Explanations
There is a dotted line on the
edge of the screen.
•
If the picture size is set to Screen Fit, change it to 16:9.
•
Change the cable/satellite box resolution.
The picture is black and white.
•
If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of Component Input 1 on the TV.
When changing channels, the
picture freezes or is distorted or
delayed.
•
If the TV is connected to a cable box, please try to reset it. (Reconnect
the AC cord and wait until the cable box reboots. It may take up to 20
minutes)
•
Set the output resolution of the cable box to 1080i or 720p.
3D
The 3D Active Glasses may
not work properly if there is any
other 3D product or electronic
devices turned on near the
glasses or TV.
•
If there is a problem, keep other electronic devices as far away as
possible from the 3D Active Glasses.
To Next Page
Loading...
