◀ ▶
English
■
Automatic Network Setup
Use the Automatic Network Settings when connecting your TV to a network
that supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the Wired.
3. The network test screen appears, and
network setting is done.
● The displayed image may differ depending on the
model.
Network Settings
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless(General)
WPS(PBC)
One Foot Connection
Connect to the network using
LAN cable. Please make
sure that the LAN cable is
connected.
To Next Page
Loading...
