◀ ▶
English
How to set up manually
To set up your TV’s cable network connection
manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test
screen.
3. Set IP Mode to Manual.
● The displayed image may differ depending on
the model.
IP Settings
IP Mode Manual
DNS Mode Manual
DNS Server 0 . 0 . 0 . 0
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
To Next Page
Loading...
