◀ ▶
English
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a PBC (WPS) button, follow these steps:
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the WPS(PBC).
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
● The displayed image may differ depending on the
model.
Network Settings 2/6
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless(General)
WPS(PBC)
One Foot Connection
Connect to the Access Point
easily by pressing the WPS(PBC)
button. Choose this if your
Access Point supports PUSH
button Configuration(PBC).
To Next Page
Loading...
