Samsung UN40EH5000 - 7. Accessing and Using the Main Menu; Using the TVs Controller

7.
Accessing
and
Using
the
Main
Menu
II
Your
1V's
Main menu contains functions that let you control many of the
1V's
features. For example,
in
the Main menu
you can change the size and configuration of the picture, its brightnes, its contrast and so on. There are also functions
that let you control the
1V's
sound, channel configuration, energy use, and a host of other features.
To
access the main,
on-screen menu, press the
MENU
(aD)
button on your remote.
To
use the Main menu, press the
J../T
buttons to move between the main option categories:
Picture,
Sound, Channel,
etc. Each time you press a
1../T
button, the main category name on the left side of the menu changes.
To
select a menu option
in
one of the categories, press the
~
button or the
ENTER
G button.
Press
it again or press
ENTER
G
to see the values or choices associated with that option. Usually, you would then press
ENTER
G
to select
a value or choice.
Press
the
RETURN
button or the
4111111
button to return to a previous screen or selection.
8.
Using
the
rv•s
Controller
Ill
The TV's Controller, a small joy stick like button on the bottom left side of the
TV,
lets you control the
TV
without the
remote control.
Power
on
Adjusting
the
volume
Selecting
a
channel
Using
the
Function
menu
Selecting
Media
Play
Selecting
the
MENU
(aD)
Function menu
R
et
u
rn
j
~~.~?-~~~~~
.
e
··
..
.
-~--------------
....
:--:
~
~
--------
~==----
--~
: ~
f.
~
I
..........
Remote control sensor
Turn
the
TV
on by pressing the Controller when the
TV
is
in
standby mode.
Adjust the volume by moving the Controller from side to side when the power
is
on.
Select a channel by moving the Controller backwards and forwards when the power
is
on.
To
view and use the Function menu, press and release the Controller when the power
is
on.
To
close
the Function menu, press and release the Controller again.
With the
Function menu visible, select
MEDIA.P
by
moving
the
Controller backwards. The
Media
Play
main screen appears. Select a
media
source
by
moving the Controller
back
and forth, and then pressing the Controller.
With the Function menu visible, select the
MENU
(aD)
by moving the Controller to the left. The
OSD
(On
Screen Display) Menu appears. Select
an
option by moving the Controller to the right.
Move the Controller to the right or left, or backwards and forwards to make additional selections.
To
change a parameter, select
it,
and then press the
Controller.
-
7-