Plug
&
Play
Set
the
Clock
Mode.
5.
Set
the
Clock
Mode
Press ENTER G and select Auto or Manual, and then press ENTER G
again.
If you selected Auto:
....
(c_loc_k_M_od_e
______
:_A_uto
____
_.,
1
The TV will automatically download the correct time from a digital channel.
, The DST (Daylight Savings Time) screen will appear. Press
ENTER
G.
~
Select On if you want to turn the DST adjustment on and off manually.
G
Enter
nD
Skip
Select Off to turn off the DST adjustment. Select Auto if you want the TV
to
adjust to DST automatically. Press ENTER G when done.
The Time Zone screen will appear. Use
the,./T
button to select your
Time Zone, and then press
ENTER
G.
If you selected Manual:
The Clock Set screen appears. Use the
•IT
buttons to change the
values
in
each field
or
use the number buttons to enter the values directly.
Use the
.._/~/buttons
to
move from field to field. When done with
all
the
fields, press
ENTER G .
...v
6.
View
the
HD
Connection
Guide
See the best way
to
connect a cable or satellite
box
for the highest quality HD pictures. Press the ENTER G button
to
close the guide.
...v
8.
Enjoy
your
Tv.
]
----------------
--------------------------------------~-
Press the ENTER~ button.
~
To
set
or
unset Store
Demo
mode
outside
of
Plug &
Play,
press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to
MENU
(liD))
and hold for more than 5
seconds. The
Store Demo
mode
is set. To cancel Store Demo, bring
up
the Function menu using the Controller,
push the Controller to the right (to
Source(£)))
and hold for more than 5 seconds.
6.
Changing
the
Input
Source
Source
List
When you are watching TV and you want
to
watch a movie on your DVD player
or
Blu-ray player
or
switch
to
your cable
box
or
STB satellite receiver, you need
to
change the Source.
1. Press the SOURCE button on your remote.
2. Use the _.IT buttons
to
select an external input source.
•rv
I
AV
I Component I
HDMI11DVII
HDMI2
~
You
can only choose external devices that are connected to the
TV.
In
the Source List, connected inputs are
highlighted.
How
to Use
Edit
Name
Edit Name lets you associate a device name
to
an input source.
To
access Edit
Name
, press the TOOLS button when
the
Source List
is
displayed The following selections appear under Edit Name:
•VCR
I DVD I Cable STB I Satellite STB I PVR STB I
AV
Receiver I
Game
I Camcorder I
PC
I DVI
PC
I
DVII
TV
I
IPTV I Blu-ray I
HD
DVD I DMA: Select the name of the device connected
to
specific input jacks
to
make your input
source selection
easier.
~
If you
connect
a
PC
to the
HOM
IIN
1 {DVI)
port
with an HOM I cable, assign
PC
to
HOM I 1
in
Edit Name.
~
If you
connect
a PC to the
HDMIIN
1 (DVI)
port
with an HDMI
to
DVI
cable, assign DVI
PC
to
HDMI1
in
Edit
Name.
~
If you
connect
an
AV
device to the
HOM
IIN
1 (DVI)
port
with an HOM I to
DVI
cable, assign DVI
to
HDMI1
in
Edit
Name.
0 6 0
To Next Page
Loading...
