Samsung UN40H5203 - Controlling External Devices; IR Extender Cable Setup

English - 10
Switching Between Video Sources
Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to a
game console connected to the second HDMI connector, press the
SOURCE button. The Source List appears
across the top of the screen. From the
Source list, select HDMI2 .
- The connector names may vary depending on the product.
Using the Remote Control to Control
External Devices
MENU > System > Universal Remote Setup
The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and other
third-party external devices connected to the TV using the TV's remote control. For each external device you
want to control, you must run the universal remote set up process. The first step in the process is connecting the
IR extender cable (included) to the TV and positioning the transmitter end of the cable in front of the device you
want to control.
Connecting the IR Extender Cable
- The color and design of the IR extender cable may vary depending on the model.
4 inches
To begin the universal remote set up process, connect the IR extender cable (included) to the TV's IR output
connector as shown in the diagram, and then position the transmitter end within 4 inches (10 cm) of the external
device's remote control sensor, pointing in the direction of the sensor.
There can be no obstacles between the transmitter end of the IR extender cable and the external device.
Any obstacles will interfere with the transmission of the remote control signals.
[UH6203-ZC]BN68-06330B-01L02.indb 10 2014-06-25  11:11:49