Samsung UN40JU6500F - Page 102

3-2
3. Disassembly and Reassemble
Description Picture Description Screws
3
Remove the screws of ASSY COVER
P-REAR.
40": 14 EA•
Torque :
7~ 8Kgf.cm.
6001-002755
In this step, two types of screws are
used.
48": 17 EA/1 EA•
50": 17 EA/1 EA•
55": 17 EA/1 EA•
60": 18 EA/1 EA•
65": 18 EA/1 EA•
75": 22 EA/1 EA•
Torque :
9~ 10Kgf.cm.
6003-000003
(48"/50"/55"/60"
65"/75")
4
Remove the ASSY COVER P-REAR.
5
Remove the Electric tapes shown on the
image.
EMI Point• : After removing release
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
wherethetapeswererstapplied.
Filament Tape: EMI Point
Filament Tape: Dressing Point
Cable Dressing