Samsung UN40KU7000F - 4-3. Factory Mode; Factory Remote; Samsung IR Remote (Limited Operation)

4-3. Factory Mode
Factory Remote 
Power TV ON.1.
Select TV Source.2.
Info3. → Factory.
Use 4. MENU for return.
Samsung IR Remote (Limited Operation) 
TV Power Standby.1.
Press as follows. 2.
Remote Button :• Power OFF MUTE 1 8 2 Power ON
Option• (must set Option Bytes when replacing Main Board.)
Option → • Factory Reset (returns TV to out of box condition. Does not reset Apps.)
SVC → • Test Patterns
SVC → Info → • ER Count (Important to check for errors.)
Resets to 0 with Factory Reset. -
First Screen Appearing in Factory Mode
Ex. SAMPLE Model•
T-JZL6AKUC-XXXX.XX
T-JZMAKUS-XXXX
tztv-X.X.-main2016-jazz-m__XXXXXXXX.X
BT Version : BLUETOOTH-VER-XXXX
E-Manual:----
CAMERA:****
Blaster Version : Not support
E-POP Version : JAZZLUHD-XXXX.X
EDID SUCCESS
HDCP SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : NONE_16,NONE,7000,NONE
DTCP Not Support
FRC-[JAZZ-L/?][NON FRC][HW:0x00]
TCON Version:----
Model : UN**KU7000F***
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI Version : BCM43569_16210_WLC_E_STATUS_
ABORT
CO NfO WO MO D/ HX P/ AO O S/ N/ RO SC/ SiO(P)
NS//
Factory Data Ver : XXX / Fixed Ver : XX
EERC Version : 75 / WB Ver : 8
CPLD/LD : N/A
SmartControl : 0
Board Info : 2015/12/29/PV/12/BN41-02528A
Factory Reset In Production : ----
SID : ----
Date of purchase : --/--/----
Main SW Version 9
Wired MAC (Status) 9
Sub SW Version 9
Wireless MAC (Wi-Fi Module) 9
CO NFO WO. etc. 9
Certicate•
Netx•
Wide Vine•
etc. Status•
Testing Items 9
4-14
4. Troubleshooting