Factory Menu Name Data Range
Menu OSD
Operation
Music Mode
External Source
Eco Solution
Cloning
Shop Option
Exhibition Mode OFF
Peak Mode ON
Metadata ON
Shopmode Picture Reset ON
Asia Option
Unbalance OFF
AF Level adjust 0
TX Power Level 0
Mono Last Memory OFF
H Shaking 0
SOUND
High Devi OFF
*If the broadcast signal is not good, TV will
complement the characteristics of the signal (most
use when weak signal comes from the growing area
countries)
Carrier_Mute ON
*If the noise comes from weakness-electromagnetic
eld, TV will be set Mute automatically(Only default
on in North America)
Pilot Level High Thld 0x20h
* The High threshold value of stereo signal(If Pilot
level is greather than High threshold value, recognize
Stereo signal)
Pilot Level Low THLD 0x10h
* The Low threshold value of stereo signal(If Pilot
level is less than Low threshold value, recognize
Mono signal)
Carrier2 Amp High ThLD 9
Carrier2 Amp Low THLD 6
Amp Volume 0xc4h
Amp Scale 0x3ch
Amp EQ Check Sum 0x000057B5
Subwoofer Support 3
Woofer Type 0
Woofer Volume 0xc7h
Woofer Scale 0x3fh
Woofer Check sum 0x0000A273
PEQ Inx 76
To Next Page
Loading...
