Getting Started
English
UN32C6500 / UN40C6500 / UN46C6500 / UN55C6500
See separate guide for installing the stand.
s
s
s
s
s
Stand (1EA) Guide Stand (1EA) Screws (9EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using four screws (M4 X L8) as shown.
s
s
s
s
2. With your TV upright, connect the TV to the Stand as
shown.
3. Fasten two screws (M4 X L8) at position , and then
fasten three screws (M4 X L8) at position .
✎
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the LED TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
s
s
s
s
s
Top view
Rear
Guide Stand
Screws (M4 X L8)
Stand
Screws (M4 X L8)
s
s
s
1
2
(M4 X L8)
To Next Page
Loading...
