Samsung UN46C7000 - Securing the TV to the Wall (depending on the model); Accessaries; To prevent the TV from falling

I Securing the TV to the Wall (depending on the model)
C~ution
, ...•.. PUII!~g,PVshirig,t?rqlirn~ifl
. :. ovefof; destabilize theTll;~ .
..,.
precautions provided on th~
" follows, .
• Accessaries
Holder-TV
~ ScrewG)(M4 X L 16)
(;Jf Screw(J) (M8 X L 19)
• To prevent the TV from falling (According to the TV type, see drawing annex)
1. Unscrew a screw attached on the back of your TV, then connect the Holder-TV [lor 2) with the screw through the hole.
® Make sure to only use the supplied screws.
® When you install the wall-mount, refer to the "Securing the TV to a wall or Cabinet" in the TV manual for installation type.
r------- [© Type] --------,
[® Type]
[® Type]
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws
fastened on the wall or cabinet so that the TV is fixed.
® Purchase the screws to be used on the wall or cabinet separately.
® Install the TV close to the wall so that it does not fall.
® When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
® Confirm that the cord or link does not come loose frequently.
® Before moving the TV, separate the connected cord first.
Wall
® Use the Wood screw (sold separately) from the size M4 X L20.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional installer.