Samsung UN49MU6500F - The Samsung Smart Remote

2-21
2. Product specications
2-4-3. The Samsung Smart Remote
English - 10
02 The Samsung Smart Remote
(Power)
Press to turn the TV on or off.
(Number pad)
Ǯ˵ʪΧθʪϑϑʪʒࡡɇЇɵʪθϑϩθΧ
appears on the bottom of the
screen. Select numbers and then
select Done to enter a numeric
value. Use to change the channel,
enter a PIN, enter a ZIP code, etc.
(Return)
Returns to the previous menu.
Ǯ˵ʪΧθʪϑϑʪʒ˙ͱθߢϑʪʀͱʒͱθͱθʪࡡ
the running function is terminated.
Ǯ˵ʪΧθʪϑϑʪʒи˵ʪцͱЇɇθʪ
watching a program, the previous
channel appears.
(Play/pause)
Ǯ˵ʪΧθʪϑϑʪʒࡡϩ˵ʪΧɇцɵɇʀ
controls appear. Using these
controls, you can control the media
content that is playing.
(Smart Hub)
Returns to the Home Screen.
VOL (Volume)
Move the button up or down to
adjust the volume. To mute the
ϑͱЇʒࡡΧθʪϑϑϩ˵ʪɵЇϩϩͱࢋǮ˵ʪ
pressed for 1 second or more, the
Accessibility Shortcuts menu
appears.
CH (Channel)
Move the button up or down to
change the channel. To see the
Guide screen, press the button.
Directional pad (up/down/left/
right)
Moves the focus and changes the
values seen on the TV's menu.
Select
Selects or runs a focused item.
Ǯ˵ʪΧθʪϑϑʪʒи˵ʪцͱЇɇθʪ
watching content, detailed program
˙ͱθɇϩͱɇΧΧʪɇθϑࢋǮ˵ʪΧθʪϑϑʪʒ
again, you can select or run any of
the functions displayed.
(Voice Interaction)
Runs Voice Interaction. Press the
button, say a voice command, and
then release the button to run
Voice InteractionࢋǮ˵ʪΧθʪϑϑʪʒ
once, the guide to Voice Interaction
appears.
[ Keep the remote more than
0.6 inches from your face when
using Voice Interaction through
the mic on the remote.
4 Color buttons
Use these colored buttons to access
ɇʒʒϩͱɇͱΧϩͱϑϑΧʪʀѣʀϩͱϩ˵ʪ
feature in use.
Pairing the TV to the Samsung Smart Remote 
Pairing the TV to the Samsung Smart Remote
Ǯ˵ʪцͱЇϩЇθͱϩ˵ʪƟǤ˙ͱθϩ˵ʪѣθϑϩϩʪࡡϩ˵ʪSamsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press
and hold the buttons labeled
and ɇϑϑ˵ͱиϩ˵ʪѣ˝Їθʪͱϩ˵ʪʪ˙ϩ
simultaneously for 3 seconds or more.
Installing batteries into the Samsung Smart Remote
To install the batteries, push the rear cover open in the direction of the arrow, and then insert the batteries as shown
ϩ˵ʪѣ˝ЇθʪࢋđɇʪϑЇθʪϩ˵ɇϩϩ˵ʪΧͱϑϩЭʪɇʒʪ˝ɇϩЭʪʪʒϑɇθʪ˙ɇʀ˝ϩ˵ʪʀͱθθʪʀϩʒθʪʀϩͱࢋ
׃ Alkaline batteries are recommended for longer battery life.
English - 11
When you turn on the TV for the rst time, the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press and hold
the buttons labeled and as shown in the gure on the left simultaneously for
3 seconds or more.