3-9
3. Disassembly and Reassemble
Assemble Caution
Description Picture Description
Docking PCB Assembly method
Male DOCKING PCB + STAND
1. Get wires connected with Docking PCB bottom.
2. Put wires though neck as side picture.
3. Fasten Screw on the top of Docking
PCB bottom.
GUIDE STAND + STAND + Female DOCKING PCB
1. Put wires along the guide rib and x its position
by putting tape on them.
2. Fasten Screws on the top of Docking PCB
TOP(4 PCS).
Wall type
* Specication of the connection of the wires in
wallmounting.
To Next Page
Loading...
