3-8
3. Disassembly and Reassemble
Assemble Caution
Description Picture Description
1. When you do assemble. If do not attach
the lament tape on speaker cable, the
cable can be pressed by stand cover.
2. After repair the board.
(Main board or sub docking boards).
you can check the TV working condition
by connecting male and female docking
board without assembling the Stand.
Male docking board connect to
Main_docking board, Female docking
board connect to Panel_docking board.
refer to side the picture.
Do not disassemble the Panel except to change IR & 3D Emmiter board. ※
To Next Page
Loading...
