3-7
3. Disassembly and Reassemble
Description Picture Description Screws
Remove the cable from Female Docking
PCB bottom.
* When assemble the Docking PCB,
be careful of the direction of cable.
10. Remove the cable between Male Docking
PCB and Female Docking PCB.
* Remove the Screws from Stand.
6003-001003
(M4, L12, TAPTYPE)
Remove the Screws from Stand bottom.
6003-001003
(M4, L12, TAPTYPE)
Cable.
Reassembly procedures are in the reverse order of disassembly procedures. ※
To Next Page
Loading...
