Samsung UN55C9000ZF - Page 9

3-6
3. Disassembly and Reassemble
Description Picture Description Screws
9. Remove the Male Docking board from
stand.
Remove the screw from Stand bottom.
6001-002283
(M3, L5, Machine)
Remove the male Docking PCB from
Stand bottom.
* When assenbling the Female Docking
PCB, tighen screw then back out 1 and
1/2 turns to leave the board loose.
This allows easy mating of the felmale and
male docking PCB.
6001-002283
(M3, L5, Machine)
Disconnect the cable from the Male
Docking PCB bottom.
Remove the Female Docking board from
stand.
Remove the screw from Stand back.
6003-001003
(M4, L12, TAPTYPE)
Remove the screws form the Male
Docking PCB.
6001-002283
(M3, L5, Machine)