3-5
3. Disassembly and Reassemble
Description Picture Description Screws
Detach the cable connected to T-con
Board and Remove the screw of T-con.
* If is not perfect connection,
may cause vertical noise. So, be careful.
6001-002283
(M3, L5, Machine)
Remove the screw of Panel_docking
board.
6001-002283
(M3, L5, Machine)
Panel
6001-002283
(M3, L5, Machine)
8. Remove the IR & 3D Emmiter.
Remove the screws from Panel.
6001-000352
(M3, L6, Machine)
Remove the IR & 3D emmiter board.
(assy board P-IR & 3D Emitter)
when assembing the Panel, be careful of
dust.
Remove any dust with a soft lintfree towel.
IR Board 3D Emmiter Board
To Next Page
Loading...
