3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
Cautions: 1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description Picture Description
Screws
1
Place TV face down on cushioned table.
Remove screws from the Stand.
Remove stand.
6001-002621
SCREW-MACHINE
(M4, L8-BLK)
2
Remove the screws of Rear-Cover.
6001-002671
SCREW-MACHINE
(M3, L6-BLK)
3
Lift up and remove the rear-cover.
* Caution : Becareful when you lift up
the rear-cover, It’s really
sharp.