English - 5
Install the Stand
See the separate stand installation guide for more detailed instructions.
Stand (1EA) Guide Stand (1EA) Screws (8EA)
Follow the steps below to connect the TV to the stand.
1 2
✎
Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen side down.
✎
Insert the Stand Guide into the slot of TV bottom side.
3
Side View
4
✎
NOTE
x
Make sure to distinguish between the front and back of each component when assembling them.
x
Make sure that at least two persons lift and move the TV.
x
Stand the product up when you fasten the screws. If you fasten the screws with the TV lying down, it may lean to one
side when you stand it up.
(M4 X L8)
X4 (M4 X L8)
Top View
ATTENTION
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT
USE OIL
Front
Rear
(Correct assembly)
(Incorrect assembly)
X4 (M4 X L8)
[UD8000-NA]BN68-03441A-01L03.indb 5 2011-02-07 오전 10:05:44
To Next Page
Loading...
