m
Auto IF rogra
Scans for channels automatically and stores them in the TV's memory,
To start Auto Program, follow these steps:
1. Push MENU ITT!_ Channe_ _ ENTER IZ3_,
2. Select Auto Program, and then press ENTERIZ3_,
3. Select Sta£, and then press ENTERIZ3_,
4. Select Air or Cab_e or both by highlighting and then pressing ENTER IZ3_,
I_ If you selected Air or Cab_e or both on the Antenna screen, your choice
will already be selected,
5. Select Next, and then press ENTERIZ3_,
6. If you selected Cab_e, the cable system screen appears, Select IDigita_ Cab_e
, and then press ENTER E3_.
I_ If you selected Air only, Auto Program starts,
To Next Page
Loading...
