1
8.
9.
Select STID_MIIRO,or IIIIRO,and then press ENTER E3_.
Repeat for Analog Cable Syste÷.
Select Next, and then press ENTER E3_.Auto IRrogra_ starts.
After all the available channels are stored, Auto Program removes scrambled
channels. When done, the Auto Program menu then reappears. This
process can take up to 30 minutes.
How to Stop Auto Programming
1. Press the ENTERE3# button to select Stop.
2. A message will ask Stop Auto Program? Select Yes by pressing the A or T
button.
3. Press the ENTERE3# button.
To Next Page
Loading...
