®
Position: Adjusts the picture position. Position is only available if Picture size
is set to Zoom10 Zoom20 Wide IFit, or Screen fit.
I_ To use the Position function after selecting Zoom10 Zoom2 or Wide Fit,
follow these steps:
%
[]
2.
3.
4.
Select the Position, and then press the ENTER E3#button.
Select the Position button, and then press ENTER C3#.
Press the A or T button to move the picture up or down.
Press the ENTER E3#button.
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER E3_.The picture will be reset to
its default position.
To Next Page
Loading...
