%
To use the Position function after selecting Screen I when connected
to an HDMI (1080i/1080p) or Component (1080i/1080p) source, follow
these steps:
%
[]
2.
3.
4.
Select the Position, and then press the ENTER E3_button.
Select the Position button, and then press ENTER IZ3_.
Press the A, T, 4 or I_ button to move the picture.
Press the ENTER E3_button.
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER E3_.The picture will be reset to
its default position.
To Next Page
Loading...
