Samsung UN55KS9000F - Factory Mode; Factory Remote; Samsung IR Remote (Limited Operation)

4-3. Factory Mode
Factory Remote 
Power TV ON.1.
Select TV Source.2.
Info3. → Factory.
Use 4. MENU for return.
Samsung IR Remote (Limited Operation) 
TV Power Standby.1.
Press as follows. 2.
Remote Button :• MUTE 1 8 2 Power
Option• (must set Option Bytes when replacing Main Board.)
Option → • Factory Reset (returns TV to out of box condition. Does not reset Apps.)
SVC → • Test Patterns
SVC → Info → • ER Count (Important to check for errors.)
Resets to 0 with Factory Reset. -
First Screen Appearing in Factory Mode (SAMPLE)
T-JZMAKUC-XXXX.X
T-JZMAKUS-XXXX
tztv-2.4-main2016-jazz-m_XXXX
Main SPI version : ****
OC SPI version : ****
BT VERSION : ****
E-MANUAL : ****
CAMERA : ****
Blaster Version : ****
E-POP Version : ****
EDID SUCCESS
HDCP SUCCESS
CALIB : AV/COMP/PC/HDMI/
OPTION :55A1MU8QK,US,9000,NONE
DTCP Not Support
FRC[JAZZ-M][120Hz][HW:0x07]
DIMMING-[GLOBAL][FF]
TCON Version:----
Model : UN55KS9000
Wired MAC ----
Wireless MAC ----
WIFI Version
CO Nf/ W/ M/ D/ HX PO AO O SO N/ RO SC/ SiO(T)
Factory Data Ver : ** / Fixde Ver : **
EERC Version : ** / WB Ver : **
CPLD/LD : N/A
SmartControl : ****
Board Info : ****/**/**/*/*/BN41-02504A
SID : ----
Date of purchase : --/--/----
Main SW Version √
Wired MAC (Status) √
Sub √
SW Version
Wireless MAC (Wi-Fi Module) √
CO NFO WO. etc. √
Certicate•
Netx•
Wide Vine•
etc. Status•
√
Testing Items
4-16
4. Troubleshooting