Samsung UN60D6450 - Managing Input Sources; Changing and Editing Input Sources

Changing the Input Source
Source
Use to select 1V or an external input source SOURCE
such as a DVD player I Blu-ray player I cable
box I STB satellite receiver .
1. Press the SOURCE button on your
remote.
2. Select a desired external input source.
You can change the view mode among
the All and Connected by pressing the ~
or.,. button.
• TV I PC I AV1 I AV21 COMPONENT I
HDMI11DVII HDMI21 HDMI31 HDMI41 USB I
All Share
~ You can only choose external devices that are
connected to the TV. In Source. connected inputs are
highlighted.
~ In Source, PC always stays activated.
Edit Name
Edit Name lets you associate a device name to an input
so urce. To access Edit Name, press t he TOOLS button In
Source. The following selections appear under Edit Name :
• VCR I DVD I Cable STB I Satellite STB I PVR STB I
AV Receiver I Game I Camcorder I PC I DVI PC I DVI
Devices
I TV IIPTV I Blu-ray I HD DVD I DMA: Name
the device con nected to the input jacks to make your
input source selection easier.
~ If you have connected a PC to the HDMIIN 1 (DVI) port
with
an HOM I cable, select PC under Edit Name to
enter a device
name.
~ If you ha ve connected a PC to the HDMIIN 1 (DVI)
port with an HDMI to DVI cabl e, select DVI PC under
Edit Name to enter a device name.
~ If you connected an AV device to t he HDMIIN 1 (DVI)
port with an HOM I to DVI cable, select DVI Devices
under Edit Name to enter a dev i ce name.
Edit Favorites
In Source, press the TOOLS button to select Edit
Favorites.
You can set an external input source as a
Favorites.
Information
You can see detailed information about the selected external
device .
Refresh
In Source, If the external devices are not displayed , press
the TOOLS bu t ton to select Refresh, then search for the
connected de v ices.