Samsung UN60ES7100 - Initial Setup (Network Configuration); Initial Setup: Network Configuration

1 .
The
1V
searches for and then
displays
all
the
wireless networks
within range. When done, it
displays
a
list
of
the networks.
In
the
l
is
t
of networks, move the
Highlight
to
select a network, and then
select
Next.
If
the
selected
network requires a
Security
Key,
the Security
Key screen appears.
~
If
you have a
WPS(PBC) compatible
router,
select
WPS(PBC)
instead, and then
follow
the directions on the screen. When
done,
go
to Step
4.
2.
Enter your network security key or
WPS PIN
using your remote.
~
Enter numbers and
letters
using your
remote.
•
You
can enter numbers by pressing the
nu
mber buttons on
the remote.
•
To
enter a letter,
move the
Highlight
to
the letter, and then
select
it.
You
can enter numbers
in
the same fashion if you
choose.
~
To
display capital letters
(o
r
redisplay small letters
if
capital letters
are
displayed), select
Caps
or Shift.
~
To
display symbols
and punctuation,
select
1
*·
To
redisplay
letters, select 1
* again.
3.
When done,
select
Next
if you have entered a security key or
WPS
PIN
if you have entered a
WPS
PIN
.
4.
Th
e
1V
checks the
wireless connection.
If
the connection
is
successful,
the
You are connected to
the
Internet. If you have any
problems
using
online
services,
please
contact
your
Internet
Service Provider.
message appears.
Select
Next
,
and then go to 4
Software
Upgrade
Step.
~
If
the connection fails, select
Previous,
repeat
Step
1 and 2,
carefully
re-enter your security key or
WPS
PIN,
then repeat
Steps 3 and
4.
If
it fails
again, select
Next
on the "Connection
Failed"
screen, and then
go
to
5-
Auto
Program
(1)
on the next
page. Configure your network
later through
Network
Settings
in the TV
's
Menu. For more information, refer to
"Setting up the
Wired
or
Wireless Ne
two
rk"
in
the
e-Manual
or
see the Network
Connect
ion sections
in
th
is
manual
(pages 15 and 3
1}.
The
1V
checks the network connection, then
displays
the
You
are
connected
to
the
Internet. If
you have any
problems
using online
services,
please
contact your
Internet
Service Provider.
message
appears.
Sele
ct
Next.
The
Software
Upgrade
screen appears.