Samsung UN60ES7100 - Configuring Network Connections (continued); Wired Network Configuration

Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration
Protocol
(DHCP)
to
configure network
connections. Home networks that support
DHCP automatically provide the
IP
address, subnet mas
k,
gateway, and
DNS values
your
lV
needs to access the
Internet so you
don't
have
to
enter them
manua
l
ly.
If
you have a
Static
IP
network, see your user's manual for configuration instructions.
To
configure the network connection for a wired network that uses
DHCP,
follow these steps:
1 .
Connect your
lV
to
your network as shown
in
one
of
the illustrations
on page 16.
2.
Turn
on your
lV,
and then
go
to
the
Network Settings
screen.
(
Menu-
Network-
Network
Settings)
3.
Select
Start.
4.
The Network Connection screen appears, and verifies the network connection. When the connection
has been verified, the
"You
are connected to the
Internet. If
you have any problems
using
online
services,
please
contact your
Internet
Service
Provider."
message appears. Network set up is
completed.
~
If
your TV cannot acquire network the connection
values automatically
or
if you want to set the
connection
manually, select
IP
Settings
on the netw
or
k connection screen.
Set
IP
Mode
to
Enter
manually,
and then enter the
IP
Address, Subnet Mask, Gateway,
and
DNS
Server
manually.
~
For more
detailed
information, refer to "Setting up the Wired
Network"
in
thee-Manual.