Anynet+ (HDMI-CEC) Setup
Screen Menu > System > Anynet+ (HDMI-CEC)
Try Now
Enable/disable Anynet+ (HDMI-CEC).
●
Anynet+ (HDMI-CEC): Enables/disables Anynet+ (HDMI-CEC). Disabling this turns off all
Anynet+-related features.
Try Now
●
Auto Turn Off: Turns off external devices when the TV is turned off. Some devices do not support
this option.
Try Now
Using the Anynet+ (HDMI-CEC)
You can operate external devices using just the TV remote control.
Switching between Anynet+ Devices
1.
Select the virtual remote panel's or the regular remote's TOOLS button to display the list. Select
Anynet+ (HDMI-CEC) from the list. A device selection screen will appear.
2.
Select a device and wait for the switch to take place. This process may take up to 2 minutes to
complete and cannot be cancelled when started.
"
Alternatively, switch to a different Anynet+ (HDMI-CEC) device by selecting its name from the Source list.
However, Anynet+ (HDMI-CEC) cannot be used if a connected input connector is selected.
To Next Page
Loading...
