BN68-05123A-00
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control Stand Parts and Cables
x 2
Smart Touch Control Power cord IR extender Stand Cover
x 4
x 2
Batteries (AAA x 2) Wall mount adapter Cable manager
Also included: Cleaning cloth, user manual, regulatory guide,
3D Active Glasses
Step
1
Attach the TV to
the Stand
Step
2
Connect video
devices
Step
3
Insert the
batteries into the
remote control
Step
4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
4
x4 (M4 X L12)
Insert 4 screws and secure the stand to the TV.
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
5
Place the stand covers on the stands and press
them until they click in place.
2
x 2
Leg
x 4
Screws
Put a leg and screws off to assemble the stand
out of the box.
3
Insert the stands into the grooves on both sides
on the bottom of the TV’s back.
6
Put up the TV with assistance from a person
after attaching the stands to the TV.
[UF6400-75inch_QSG]BN68-05123A-00ENG.indb 2 2013-02-26 �� 8:47:22
To Next Page
Need help?
General
Weight and Dimensions
