()'
Initial
Setup
When you turn on your
1V
for the first time, it immediately starts the Initial Setup.
During Initial Setup, connects
to
your home network, implements Smart Hub
agreements, links
to
the source
of
your
live
1V
signal, and sets
up
control
of
your set-
top
or satellite box.
Information
You
Need
Have the following information on hand
before you turn on your
1V
for the first
time:
Your wireless network's password.
(Make sure your
network
is on.)
Your Postal
or
Zip code.
The name and location
of
your cable
or
satellite provider (if you use one).
Running
Initial
Setup
1 Plug your
1V
into a wall outlet.
~
Aim the Remote Control at the
1V
.
Internet
Access
The
1V
must be connected to the Internet
to
use the Smart Features. If you have
a wireless network, confirm that your
network router
is
working before you
start the initial setup. If you have a wired
network, connect the
1V
to
the network
with an Ethernet cable before you begin
(CAT
7 cable preferred).
3 Press the
TV
button on the Remote
Control
to
turn on the
1V,
and then
follow
the
directions on the screen.
To
learn more about operating your
1V
and its Smart Features, see your 1V's user's
manual or launch the 1V's built
in
e-Manual. Congratulations on the purchase
of
your
new Smart 1V!
To Next Page
Loading...
