7
INSTALLATION
Installing the clean station
Installation guide
1
As the outlet is at the rear of the product, do
not put the product close against a wall, allow
10 cm (4 in) space between the wall and the
product, and place the product on a stable
oor.
2
Put the power cord into the groove at the
bottom of the clean station, arrange the cord
neatly along the wall and plug the product in.
• Leaving the cord out on the oor can lead
to the power cord being damaged or cause
a tripping hazard.
• When the clean station is plugged in, the
status indicator turns 'blue' and then turns
off.
Please refer to the QR code for detailed information on the use of product and
cleaning methods.
INSTALLATION
1_VCA-SAE90_EN_00832F-02_AA.indd 7 2020-08-03 오후 4:01:26
To Next Page
