7
INSTALLATION
Installing the clean station
Installation guide
1
As the outlet is at the rear of the product,
do not put the product close against a wall,
allow 10 cm space between the wall and the
product, and place the product on a stable
oor.
2
Put the power cord into the groove at the
bottom of the clean station, arrange the cord
neatly along the wall and plug the product in.
• When the cord is placed on the oor
carelessly, the power cord may be damaged
or a person can trip over the cord.
• When the clean station is plugged in, the
product status indicator turns to 'blue' and
then goes off.
❇ Please refer to the QR code for detailed information on the use of product and
cleaning methods.
2
1
Washable
Micro lter
Jet Dustbin
Metal Mesh
Grille lter
Clean Station
Dustbin
❇ VCA-SAE901, VCA-SAE902, VCA-SAE903, VCA-SAE904 includes only the transparent Dustbin.
❇ Need to detach the Metal Mesh Grille lter and Washable Micro lter from the Jet Dustbin
and then attach them to the Clean Station Dustbin.
INSTALLATION
VCA-SAE90_14ge_00832E-02_WA.indb 7 2020-12-09 오후 12:10:08
To Next Page
Loading...