How to troubleshoot a Samsung WA12F5S7 that won't turn on?
If your Samsung Washer isn't working, please check the following: Is the water tap opened? Is the washer plugged in? Is there a power outage? Is there enough water supply?
What to do if my Samsung WA12F5S7 Washer won't drain water?
If the water isn't draining from your Samsung Washer, check if the drain hose is positioned downwards (for models without a pump). Ensure the drain hose isn't frozen or clogged. If the water doesn't drain within 30 minutes, a buzzer will sound, and the display will show '5E'.
Why is my Samsung WA12F5S7 leaking water?
If you're experiencing a water leakage error with your Samsung Washer, verify that the end of the drain hose is correctly placed above the pump hose guide and not resting on the floor. Also, inspect the drain hose for any blockages caused by foreign objects.
Why is the spin cycle not working on my Samsung Washer?
If the spinning function isn't working on your Samsung Washer, ensure the laundry is spread evenly inside the washer. Also, make sure the washer is placed on a sturdy, flat surface.
Why Samsung Washer won't turn on?
If your Samsung washer isn't working, make sure the water tap is open, the washer is properly plugged in, there isn't a power outage, and that there's sufficient water supply.
What to do if my Samsung Washer has a water leakage error?
If your Samsung washer displays a water leakage error, ensure the end of the drain hose is correctly placed over the pump hose guide and not directly on the floor. Also, check the drain hose for any blockages caused by foreign substances. If the error persists, no answer.
Why Samsung WA12F5S7 Washer is not spinning?
If the spinning function isn't working on your Samsung washer, ensure the laundry is spread evenly inside the washer. Also, confirm that the washer is placed on a sturdy, flat surface.
Why is no water coming into my Samsung WA12F5S7?
If water isn't being supplied to your Samsung Washer, make sure the water tap is open and that water isn't cut off. Also, check the water supply hose and its connections for any clogs. Ensure the water tap isn't frozen. If the water supply isn't finished in 1 hour, or there's no water level change 5 minutes (10 minutes for some models) after starting, the buzzer will ring, and '4E' will show on the display.
What to do if Samsung WA12F5S7 won't drain?
If your Samsung washer isn't draining, check if the drain hose is positioned downwards (for models without a pump). Also, inspect the drain hose to ensure it isn't frozen or clogged.
How to fix a Child Lock error on Samsung WA12F5S7?
When a Child Lock error occurs (indicated by a blinking “CL” or “dE” message), the water drains with an alarm. Once draining is complete, turn the power off and then on to resume normal operation. To clear the “CL” display, close the door after draining, then turn the power off and on.
To Next Page
General
