Samsung WA16R3Q3DW/XAP - Page 7


3.WATER SUPPLY
(1) This key is valid except for e rror cases.
(2) This key-in changed the mode as follows.
Cold Water
→
Hot/Cold Water
→
Hot Water
(3) If you select a water supply by using the water supply key, the selected water supply setting remains valid
even if you changed a course after. If you switch to the wool course, cold water is automatically selected, but
the previous setting is restored if you switch to the other cou rse.
(4) Error cases as follows in above item (1).
- Water supply error
- Drain error
- Water sensing error
- Door error
(5) While water is being supplied the corresponding water supply lamp flashes on/off by 1 sec. interval.
4.START/HOLD
(1) This key-in toggles between start and pause as follows.
Start
→
Hold
(2) Pause displays the remaining 1 sec. on/off.
(3) This key performs error clear function.
- Water supply error
- Drain error
(4) Delay time to re-start after pause mode is as follows.
5.WATER LEVEL
(1) The Water Level key is always valid except for Error cases.
* Error: Water Level Sensor, Water Supply Error, Drain Error, Door Error, Unbalance Error
(2) Pressing the Water Level key shows the options in the order as below.
Midium
→
High
→
Maximum
→
High
→
Medium
→
Med-Low
→
Low
→
Extra Low
High
→
Medium
STAR T MO DE DR IVING PART START FUNCTION HOLD FUNCTION START FUNCTION REMAR K
WATER SUPPLY
W ater Supply Valve
Rinse Valve
De lay tim es is 10
sec. dispersing 1
after UNB is detected.
WASH
Motor
MR.ML
DRAIN/HOLD
Drain
Motor
SPIN (including
intermittent sp in)
Drain
Motor
Motor
(ML )
2sec.
2sec.
4sec.
10sec.
10sec.