2-1. Control Panel
2-2 FUNCTION OF CONTROL KEYS
1.COURSE
(1) Before the initial start key is entered or during the pause mode, each pressing of this key shows the
selectable courses as in the order below.
DIGITAL
→
BLANKET/HEAVY
→
SOAK
→
ECO+
→
SPEEDY
→
WOOL
(2) Each time you press the key whilst in valid operation, it gives a beep sound for each key-in but it does
not perform any corresponding action.
(3) When you press HOLD key and change the course while the selected course is valid and in normal
operation, the course selected at last resets the current settings as its default initial values even if you
changed the course (wash, rinse, spin) by using the Manual key.
(4) When the selected course is valid and in normal operation, pressing any key is valid except for the
Course Selection key.
2. TECHNICAL POINTS
To Next Page
Loading...