(5) Function Table for Courses
2.MANUAL KEY(WASH, RINSE, SPIN KEY)
(1) Input of this KEY is always effective, except for the cases that the intermittent spin, spin,
or hold function is being performed.
- If you select the silver-sterilizing course/tub-washing course, this KEY is not availably selected.
(2) The function of this KEY is as follows.
At the initial stage of the POWER ON (i.e., when every course was selected already), if you input this
MANUAL key before pressing START key, it performs a manual function of that course.
If you input this MANUAL key while one of the courses is in progress(motion), it performs the ADD
function of that course.
Input of WASH KEY while one of the courses is in progress will perform to select the time of
washing (before the end of washing).
Input of RINSE KEY while one of the courses is in progress will perform to select the time of rinse
(before the end of rinse).
Input of SPIN KEY while one of the courses is in progress will perform to select the time of
SPIN (before the end of dehydration).
The time of w ashing and the number of rinse can be ADDed in a WASH+RINSE cycle of each
course.
The number of rinse and the time of spin can be ADDed in a RINSE+SPIN cycle of
each course.
DIVISION DIGITAL BLANKET /HEAVY SOAK ECO+ SPEEDY WOOL
WASH
TIME
MANUAL SET 6~30min. 6~30min. 6~30min. 6~30min. 1~15min. 1~15min.
MAXIMUM
20 min.
15 min. 20 min. 10 min. 5min. 5min.
HIGH 20 min. 15 min. 20 min. 10 min. 5min. 5min.
MEDIUM 20 min. 15 min. 20 min. 10 min. 5min. 5min.
MED-LOW 15 min. 15 min. 20 min. 10 min. 3min. 5min.
LOW 15 min. 15 min. 20 min. 10 min. 3min. 5min.
RINSE
MANUAL SET 1~5 Times 1~5 Times 1~5 Times 1~5 Times 1~5 Times 1~5 Times
INITIAL VALUE 2Times 2Times 2Times 1Times 1Times 2Times
SPIN
TIME
MANUAL SET 1~9 m in. 1~9 min. 1~9 min. 1~9 m in. 1~9 min. 1~9 min.
INITIAL VALUE 5min. 5min. 5min. 3min.
Max,High,Med
:3min.,
Med-low Low
:1min.
1min.
INITIAL WAT ER SU PPLY Cold Water Cold Water
Cold
Water
Cold Water Cold Water
Cold
Water
WEIGHT SENSING W/L
Low~
Maximum
Low~
Maximum
Low~
Maximum
Low~
Maximum
Low~
Maximum
Low~
Maximum
(3) Spin-Only Function (for spin at each course)
If you touch this KEY before pressing START KEY at initial stage (under digital condition), the
SPIN-ONLY function will be selected and be performed with START KEY.. Every time of
touching this KEY while the spin function is in progress will show the following display.
→
→
→
→
→
→
→
→
To Next Page
Loading...