12_ setting up your washer12_ setting up your washer
setting up your washer
Baby Care program
This course washes frequently washed items such as baby clothes and underwear to prevent
damage to the fabric and adds extra rinse cycles to ensure cleanness.
1. Add the laundry into the tub and close the door.
2. Press the Power button to turn the washer “On”.
3. Select cycle using the cycle selector
4. Press the Start/Pause button.
• The washer rotates the washing plate without supplying water, detects the weight of the
laundry and shows the recommended water level.
• The wash and rinse functions include a soak cycle.
5. Add detergent and fabric softener to the Magic Detergent Compartment according to the
water level and close the cover.
Clean Tub program
Use this program to clean the tub. It will keep the tub clean and sanitary.
1. Add the laundry into the tub and close the door.
2. Press the Power button turning the washer “On”.
3. Select cycle using the cycle selector
4. Press the Start/Pause button.
5. Add detergent and softener to the Magic detergent compartment according to the water
level and close the door.
• Never place laundry in the tub when cleaning inside the tub, as this can cause
discoloration or damage to the laundry.
• When doing the laundry after cleaning the tub, you may fi nd some impurities. These are
just detergent residues and impurities after the tub cleaning. Perform the rinse cycle two
to three times.
• The Soak function is set automatically.
• The initial water level is selected at the mid-level between Maximum and Mid.
• You cannot select the ‘Hot’ option for the water supply for this program.
Delay Start Course
Use this to specify a time for the wash cycle to start, for example, when you need to go out and
are unable to monitor the washer.
1. Add the laundry into the tub and close the door.
2. Press the Power button to turn the washer “On”.
Select cycle using the cycle selector.
3. Press the Delay Start button.
You may set the delay end time using the Delay Start button from between 3 to 19 hours.
4. Press the Start/Pause button and add the appropriate amount of detergent into the
detergent drawer.
5. Add detergent and softener to the Magic detergent compartment according to the water
level and close the door.
The wash will fi nish by the set time.
Add detergent and softener according to the water level and close the lid.
• Detergent must be added into the detergent drawer.
• If detergent is added onto the laundry directly, some clothes may become discolored
because the start has been delayed.
• To cancel a Delay Start, press the Power button.
WA17GWGIH-02685M_EN.indd Sec3:12WA17GWGIH-02685M_EN.indd Sec3:12 2011-12-06 3:39:212011-12-06 3:39:21
To Next Page
Loading...
