18_ setting up your washer18_ setting up your washer
setting up your washer
Step 3
Connecting the drain hose(option)
1. Press the joint ring and place it around the drain hose.
2. After placing the drain hose into a drain outlet, join the
other end of the hose to the drain outlet of the washer.
3. Ensure that they are connected tightly by pressing the joint
ring and pushing it into the drain-outlet.
• The length of drain hose is adjustable so that it can be
extended to the appropriate length.
Changing the direction of the drain hose
• Press the handle of the joint ring to pull out the drain hose.
Change the direction of the drain hose and follow the above
guidelines again.
drain-outlet
WA17GWGIH-02685M_EN.indd Sec3:18WA17GWGIH-02685M_EN.indd Sec3:18 2011-12-06 3:39:262011-12-06 3:39:26
To Next Page
Loading...
