Samsung WAM250 User Manual

Wireless Audio - Multiroom
HUB
User Manual
A
Front Panel
1
This indicator turns on when power is supplied to the HUB.
2
This indicator blinks when the HUB is in pairing mode.
After pairing is complete, this indicator stops flashing and operates in normal mode.
Pairing mode continues for a set time period. The indicator may keep blinking after pairing is
completed.
3
This indicator turns on when the HUB is connected to a wireless router with an Ethernet cable.
4
This indicator turns on when the HUB is set to Repeater mode and used to expand wireless Wi-Fi
coverage in a network that includes another HUB and a wireless router.
If you have trouble connecting the HUB and Wireless Audio - Multiroom because the signal
is blocked or the distance between them is too great, add a new HUB in Repeater mode to
expand wireless coverage.
A
What’s included
LAN cable Power Adaptor User Manual
A
Connecting the HUB to Your Wi-Fi Network
•AWirelessAudio-MultiroomscanbeusedanywhereyourWi-Fisignalreaches.
➜ ➜
LAN
1 ConnecttheHUBtoyourrouterormodemusinga
LANcable.
Plug
In
2 Plugtheincludedpowercableintothebackof
theHUB,andthenplugthepowercordintoawall
socket.
Plug
In
3 AfterthePairingIndicatorontheHUBlights,plugin
theWirelessAudio-Multiroom.
(Formoreinformation,seetheUserManual.)
q w e r
A
Rear Panel
1
SPK ADD
Press this button to set the HUB to Pairing mode when adding an additional
Wireless Audio - Multiroom or to switch the HUB to Repeater mode.
(Press and hold for 1 second to switch to Pairing mode. Press and hold for 10
seconds to switch to Repeater mode.)
2
SERVICE
Used to update the firmware.
The SERVICE port is only for updating.
3
ETHERNET SWITCH
Used to connect a LAN cable.
If you want to connect another wired device to the router that the HUB is
connected to, and all the router’s wired ports are occupied, you can connect it
to an unoccupied LAN port on the HUB.
Connecting to the HUB provides the same functionality as being connected to the
router. However, the link to the router will be lost if you power off (unplug) the HUB.
Note : The HUB and the router must have a hard-wired connection.
4
RESET
Press the RESET button with a pen tip for 5 seconds to reset the HUB.
5
DC IN
Connector for the power cable.
wq e r t
WAM250
AH68-02717A-01
AH68-02717A
02717A-WAM250-XU-QG.indd 1 2014-03-14 오전 10:40:39

Samsung WAM250 Specifications

General

Product color	Black
Number of amplifier channels	- channels
Number of audio source inputs	-

Weight and Dimensions

Depth	106 mm
Width	100 mm
Height	25 mm
Weight	400 g