Samsung WD8704EJN - Removing Shipping Bolts

16_ setting up your new washing machine
STEP 2

Beforeinstallingthewashingmachine,youmustremoveallshippingboltsfromthebackofthe
unit.
1. Loosenalltheboltswiththesuppliedwrench.
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
Packagingmaterialscanbedangeroustochildren;keepallpackagingmaterial(plastic
bags,polystyrene,etc.)welloutofthereachofchildren.
setting up your washing
machine

WD8704RJ-02718A-07_EN.indd 16 2014/6/11 17:13:59