Samsung WD8NK52E3AW/EO - User Manual

39 pages

Save Page as PDF

To Next Page

CONTENTSWASHING MACHINE (DRUM)

REPAIR GUIDE

Manual

SERVICE

WASHING MACHINE

DRUM TYPE

The model code is on the next page.

1. Safety Instructions

2. FeaturesandSpecications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

6. Reference

WD8NK52**A*WD8NK52**Z*

Main Page

Questions and Answers

J
Jordan WilsonAug 7, 2025
Why is there no water supply in my Samsung WD8NK52E3AW/EO?
- D
  danieldanaAug 7, 2025
  If your Samsung Washer isn't supplying water, there may be several reasons: * Foreign material might be entering the water supply valve, which indicates a water supply valve fault. * The water supply valve terminal might not be connected. * The warm water and rinse connectors might be wrongly connected to each other, which indicates a water supply valve fault. * The PCB terminal from the drain hose to the detergent drawer might not be connected, which indicates a water supply valve fault. * The transparent hose might be folded or torn, which indicates a water supply valve fault. * Weak water pressure can cause a time delay, suggesting a main PCB fault. * The water valve might be frozen during the winter season, suggesting freezing.
J
james84Nov 22, 2025
Why is the water level incorrect in my Samsung Washer?
- J
  James JacksonNov 23, 2025
  If you're experiencing water level issues with your Samsung Washer, it could be due to the following reasons: * The part of the hose where the water level sensor is located is damaged (punctured), suggesting a water level sensor fault. * The hose is clogged with foreign material, also suggesting a water level sensor fault. * The hose is folded, also suggesting a water level sensor fault. * Too much lubricant has been applied to the insertion part of the air hose, also suggesting a water level sensor fault. * Hose engagement error (disengaged), also suggesting a water level sensor fault. * Part fault (Faulty internal soldering), also suggesting a water level sensor fault. * The water level sensor terminal is disengaged, in this case the water level sensor terminal is disengag...