5-2
5-2. ASSEMBLY AND DISASSEMBLY
Part Name Descriptive Picture How To Do
ASS’Y COVER
TOP
1. Remove the two screws holding the Top Cover at
the back of the unit.
2. Remove the top-cover through pushing and pulling.
3. Then, the Water (Pressure) Sensor, Noise Filter
and Water Valve can be replaced.
FRAME FRONT
1. Remove the Top Cover and the Ass’y Drawer.
2. Remove the two screws on the front of the control
panel.
Warning! To avoid risk of electrical shock, personal injury or death, disconnect the power to the ashing
machine
sensor pressure
noise lter
water valve
To Next Page
Loading...
