5-1
5. ASSEMBLY AND DISASSEMBLY
No. Tool DESCRIPTION
1 Box driver
10 mm
13 mm
19 mm
Heater (1)
Motor (1), Balance (5), 2 holes of each left and right of the
shock absorber 1 Pulley hole
2 Double-ended spanner 10, 13, 19 mm
Replaceable for the box driver.
Since the bolt runs idle when the box driver is used, use the
box driver 17mm.
3 Vice pliers
Tool to protect the idle and abrasion of the bolt for the box
driver.
4 Other (Driver, Nipper, Long nose) General tools for the after service.
5 JIG for the Tub 1 (Disassemble and Assemble)
5. ASSEMBLY AND DISASSEMBLY
5-1. TOOLS FOR DISASSEMBLY AND ASSEMBLY
To Next Page
Loading...
