5-4
5. ASSEMBLY AND DISASSEMBLY
Part Name Descriptive Picture How To Do
BELT
Before removing the belt, should be opened the Cover
Bottom.
1. Remove the belt before the re-assembly.
2. Ensure the belt is placed on the center of the motor
pulley.
<Belt Assembly>
Hang the belt on the motor pulley()
before placing it around the pulley ()
MOTOR
1. Remove the wire housing from the motor.
2. Remove the bolts holding the motor by using the
power screwdriver.
3. Remove the motor.
Water Supply
Valve
1. Remove the xing screws for the water supply
valve.
2. Disconnect the valve wires.
3. Separate the water hoses.
To Next Page
Loading...
